Cutting edges have moderate impact resistance to allow them to perform across a variety of applications boosting your machines versatility. They are designed to reduce the time required to replace your cutting edges, increase bucket capacity, and reduce downtime by maintaining a long wear.
| Model Number | D355A-3 |
|---|---|
| Series Number | |
| Configuration | Angle |
| Serial Number | 1632-UP |
| Blade Position | Hot Cup End Bit LH |
| Blade Thickness | 1.625 |
| Blade Width | 16 |
| Blade Length | 25 |
| Hole Quantity | 7 |
| Bolt Diameter | 1 |
| First Hole Distance From End in Inches | 1.5 |
| Second Hole Distance From First Hole in Inches | 5.375 |
| Third Hole Distance From Second Hole in Inches | 5.813 |
| Bolt Quantity for First Row of Holes | 3 |
| Bolt Length for First Row of Holes | 3.75 |
| Bolt Quantity for Second Row of Holes | 4 |
| Bolt Length for Second Row of Holes | 4 |
| Second Set of Holes First Hole Distance From End | 1.5 |
| Second Set of Holes Second Hole Distance From First Hole | 4.875 |
| Second Set of Holes Third Hole Distance From Second Hole | 4.375 |