Cutting edges have moderate impact resistance to allow them to perform across a variety of applications boosting your machines versatility. They are designed to reduce the time required to replace your cutting edges, increase bucket capacity, and reduce downtime by maintaining a long wear.
| Model Number | D37PX-21 |
|---|---|
| Series Number | |
| Configuration | Power Angle Tilt |
| Serial Number | 5001-UP |
| Blade Position | Level Cut End Bit LH/RH |
| Blade Thickness | 0.625 |
| Blade Width | 6.5 |
| Blade Length | 15.906 |
| Hole Quantity | 4 |
| Bolt Diameter | 0.625 |
| First Hole Distance From End in Inches | 2.52 |
| Second Hole Distance From First Hole in Inches | 3.15 |
| Third Hole Distance From Second Hole in Inches | 3.15 |
| Bolt Quantity for First Row of Holes | 4 |
| Bolt Length for First Row of Holes | 2.25 |
| Bolt Quantity for Second Row of Holes | 0 |
| Bolt Length for Second Row of Holes | 0 |
| Second Set of Holes First Hole Distance From End | 0 |
| Second Set of Holes Second Hole Distance From First Hole | 0 |
| Second Set of Holes Third Hole Distance From Second Hole | 0 |